Ad 2003-15 R2

[MagSeal]

407

I read it, I think everyone should...heck, I'm still reading it....The end must be near. 😀


And just out of curiosity...who out there didn't already grease the splines every 100 hour inspection?

 

[jetbox]

Yeah, no guff Magseal, there's no way you can go more than a 100hrs without greasing those stupid splines!!!
I still say that pump should've been gear driven in the first place and instead of installing that friggin Poly-V belt mod, the operators should be changing the hydraulic oil and filter every 100hrs instead.
The new belt won't help you if you spring a leak or if your fluid is full of crap or ice crystals (apparently, the fluid temperature doesn't rise above 0 degrees celsius when operating in cold weather).
Anyways, just me ranting again!!
😀

 

[pitchlink]

Hey guys,

Since I'm not working off a base with an A-star any more and my Eurocopter CD is a little out of date I was wondering what the latest times are for greasing the splines and changing the oil.

If I read my old CD correctly, which is unlikely, it says to change the oil every 2500 hr or 4 years.

Regards,
pl

From the PRE - Master Servicing Recommendations
HYDRAULIC SYSTEM
MET 12.00.00.301 2500 H * // 4 Y
Drain and fill.
No tolerance on this interval.