OOOOKAY-
763 #365 had its CIP at MCI. When the p/ports were disabled, the new B/class seats STOPPED working!! An internal audit/ investigation has found several "misplaced" wires on the WRONG circuit breaker, the wrong side of the correct breaker (UNprotected) or terminal post. The B/class & Forward T/class p/port wiring was inspected and found "serviceable". The main cabin p/ports were a different story!!! Avionics guys, still at AA, from MCI, check your maint. records for the p/port T/class installation, get your ASAP reports ready!!!!
A Fleet Campaign Directive(FCD) is going to be issued to inspect ALL 762/763 CIP p/port and passenger entertainment (seat control, IFE & EPL) power/signal wiring connections and routing.
BTW, an inspection card tests the p/ports at "voltage monitor"(12 to 15 vdc), loads of 75W & 100W. The splitter stops the current at 95-100W and also tests the "reset" function at the p/port outlet. So "E", your power hog lap warmer will function on our p/ports, as long as the lap warmer does NOT EXCEED 95W!!!
I would say within the next month, this will be a bump in the road in the rearview mirror, UNLESS you were involved at MCI!!