whirly_001
Member
- Joined
- Nov 22, 2005
- Messages
- 15
- Reaction score
- 0
A/C 753US was damaged in PHX by jetway prior to pushback. A/C has been moved to the barn for repair.
Was it the driver or the auto leveler?A/C 753US was damaged in PHX by jetway prior to pushback. A/C has been moved to the barn for repair.
It was the driver, getting ready to push back for departure and the driver went forward instead of backwards. Oopps!Was it the driver or the auto leveler?
N753US Is in PHX for repair to dent/hole on L/H side just fwd of L1 door. Wile walking out to A/C to see damage last night could not help but see: 1. six (6) screws on a belly panel that had been speed taped up in place. 2. a belly panel that was pealing apx, 6in X 2ft 3. #1 Eng I/B fan cowl service door that was held close with speed tape. 4. L/H aft wind to body panel with the worst speed tape job for loose or missing seal.
"Those that live in glass houses should not throw stones"
That would of never of flown out of PHX looking like that..
You are missing the point:
NO i am not.
Was that a/c airworthy, minus the damage/hole in the fuselage?
Do you know for a fact that the above items were or were not documented. Did they conform to any EA, or OM7, or Typical repair? Do you Know when the a/c saw its last maint. ron? The a/c was getting the job done.
After the a/c damaged was addressed, did you take upon yourself to follow the "creed" and address those items?
Again i did not miss you point.
But what you did by posting such information is pure lowlife BS.
Timco over at Goodyear (GYR) has a fire right now in one of the hangars. The PHX FD just called a 2nd alarm. The fire is inside the outer wall of the hangar. They report said there was a jet inside, and there was concern about loosing it, but the hangar doors were closed. This was just reported at 17:50 MST todayDon't you mean leave Aeroman's or Timco's hangar?
Right now all I can say is it was started by the weld shoop.Timco over at Goodyear (GYR) has a fire right now in one of the hangars. The PHX FD just called a 2nd alarm. The fire is inside the outer wall of the hangar. They report said there was a jet inside, and there was concern about loosing it, but the hangar doors were closed. This was just reported at 17:50 MST today
Don't you mean leave Aeroman's or Timco's hangar?